RADIAL BLOWERS
LOW PRESSURE BLOWERS
Feature of this direct driven blowers is the fan housing with drum impeller with wide forward curved blades. The compact design guarantees an extremely low-noise operation. The suction side can be provided with a protective mesh with an optional suction
inlet with valve. Furthermore, we have an extensive range of accessories. All fans can be supplied in 8 positions. When ordering, you decide on a left or right rotation. The motor can be mounted horizontally or vertically.
All fans are suitable for continuous operation. The fan housing and blades are available in three materials: Aluminium, (stainless) steel and resin and are suitable for continuous operation.
Aluminium and steel
The blowers are in standard version suitable for temperatures up to 80°C. For temperatures up to about 180°C., adjusted types are available. The motors IP-54 are equipped with a voltage of 230 V or 230/400 Volt to 3 kW. The frequency is 50 Hz. Other
voltages and frequencies are available. The blowers can also be supplied with an adjustable engine.
Resin/PVC
In general, the characteristics of the plastic fans are similar to the metal versions, but only usable at temperatures up to 50°C.
Download the PDF below for detailed information:
RADIAL BLOWER STEEL LOW PRESSURE
RADIAL BLOWER ALUMINUM LOW PRESSUE
PLASTIC RADIAL BLOWER
LOW PRESSURE BLOWERS TWIN
Blowers Features of the low pressure twin carried two blowers with a motor.
The big advantage is the compact design.
The twin is only available in aluminum.
Download the PDF below for detailed information:
RADIAL BLOWER ALUMINUM LOW PRESSURE TWIN MODEL
MEDIUM PRESSURE BLOWERS
For medium pressure blowers, motor and fan housing are separate components. The impeller is near the end of the motor shaft. This construction leads the air flow outside the motor and the bearings. A seal can be installed between the housing and motor.
This type of blower is suitable for the same temperatures as the low pressure types.
Download the PDF below for detailed information:
RADIAL BLOWER STEEL MEDIUM PRESSURE
RADIAL BLOWER ALUMINUM MEDIUM PRESSURE
PLASTIC RADIAL BLOWER
TRANSPORT MEDIUM PRESSURE BLOWERS
Special about this medium pressure fans is the ability in addition to air, also (lighter) solids to be transported.
Think of dust, wood chips, sawdust, polystyrene and the like.
Download the PDF below for detailed information:
TRANSPORT BLOWER STEEL MEDIUM PRESSURE
HIGH PRESSURE BLOWERS
The constructive structure of high pressure blowers is comparable with the medium pressure blowers.
Download the PDF below for detailed information:
RADIAL BLOWER STEEL HIGH PRESSURE
RADIAL BLOWER ALUMINUM HIGH PRESSURE
SIDE CHANNEL BLOWERS
This series aluminum fan is designed for very high pressures.The compact construction is typical of these fans, absolutely oil-free operation and a built-in silencer provide many applications.
They may be deployed for both pressure and suction operation.In series is also possible if even higher pressures are desirable. It should be ensuring that there is always displaces an amount of air, otherwise the temperature can rise too
high.
If this is not the case, it must be an over-or under-pressure valve is used. If there is dirt on the media, we recommend an air filter to. There is also an extensive accessories available, such as reversing valves, blowing and sucking in one
nozzle, flanges, filters, silencers and control valves. The available voltages are standard 230 volt 1 phase, 230/400 and 400/690 volt, 50/60 Hz., and special voltages on request.
Also, there is a serie available without electric motor, these are driven by means of a V-belt.
Download the PDF below for detailed information:
SIDE CHANNEL BLOWERS
2 STAGE SIDE CHANNEL BLOWERS
Our radial blowers are equipped with three different types of impellers, depending on type and application.
|
 |
 |
Low Pressure |
Medium Pressure |
High Pressure |